08 9489 9800
View Wishlist

TL;DR: The Short Answer

Run size decides both cost and timeline. A few dozen to a few hundred copies is a digital job. Thousands of shareholder copies is an offset job. Work backwards from the date copies must be in hand, and build in a buffer for at least one round of late amendments.

  • Short run (digital): no plate or make-ready cost, so small quantities are affordable, but the per-unit price stays relatively flat.
  • Long run (offset): a fixed set-up cost is spread across the run, so per-unit cost falls as quantity rises.
  • Perfect bound is the standard finish for most annual reports and prospectuses. Saddle-stitch suits thin documents.
  • Internal sign-off is what most schedules underestimate. Plan for one round of late amendments.
  • Commit to the final quantity early, before late additions force a second press run.

If you are producing an annual report, prospectus, or member publication against a fixed AGM date, the single decision that shapes both your cost and your timeline is run size.

A print order of fifty board copies and an order of five thousand shareholder copies are two different production processes, even when the document is identical.

Once you understand why, you can plan a realistic schedule and avoid the one outcome you cannot afford: a finished document arriving after the meeting, or arriving with an error in it.

We look at the short-run versus long-run distinction, the finishing choices that apply to a corporate document, and how to build a buffer that survives the internal sign-off process.

Short Run vs Long Run

The difference between these two printing processes changes everything, and knowing which one your quantity falls into tells you most of what you need to know about cost and lead time.

A few dozen to a few hundred

Short run

Board packs, legal counsel copies, auditor sets, and a reserve for the record. These are almost always produced digitally.

Thousands of copies

Long run

Copies distributed to shareholders or members. At this volume, offset printing becomes the economical method because the per-unit cost drops sharply once the press is set up and running.

How Run Size Affects Cost Per Unit

  • Short run (digital): no plate or make-ready cost, so small quantities are affordable, but the per-unit price stays relatively flat. Printing 60 copies and 120 copies costs roughly in proportion.
  • Long run (offset): a fixed set-up cost is spread across the whole run, so per-unit cost falls as quantity rises. Printing 5,000 is far cheaper per copy than printing 500.

Cost per copy as the quantity rises

Digital short run

50

100

500

1,000

5,000

Per-copy cost stays relatively flat.

Offset long run

50

100

500

1,000

5,000

Per-copy cost falls as quantity rises.

Illustrative shape only, not a quote. Each chart has its own scale. Actual pricing depends on page count, stock and finish.

The practical takeaway: if you are printing board copies only, do not expect bulk economics.

If you are printing for a full shareholder base, the economics reward you for committing to the final quantity early, before any late additions force a second press run.

How Run Size Affects Lead Time

Digital short runs often turn around quickly as there is no plate-making stage.

Offset long runs require set-up, printing, drying, and higher-volume finishing, all of which take longer and are harder to compress. A long-run shareholder distribution needs a genuinely longer lead time than a handful of board copies, and you must build that into your schedule from the start.

Related → Digital vs Offset Printing | Digital Printing Perth | Offset Printing Perth

Finishing Choices for a Corporate Document

A shareholder report is a formal document that represents the organisation. The binding and finishing should reflect that. Here is where each option fits.

Up to around 40 pages

Saddle-stitch (stapled)

Saddle-stitch (staple) binding is a simple, cost-effective choice for brochures, catalogues and booklets of up to around 40 pages. It looks neat, folds flat and keeps print costs down. Longer documents like annual reports are better suited to perfect binding.

Standard for annual reports

Perfect bound

A squared spine with glued pages, the standard for most annual reports and prospectuses. It presents professionally, allows a printed spine, and handles substantial page counts comfortably.

Your finishing decision interacts with run size. A hardcover long run adds meaningful time and cost; a perfect-bound long run is the usual sweet spot for a shareholder distribution.

You can review the full range of binding and finishing options on our print finishing page.

Related → Booklet Printing Guide: Binding, Page Count and Paper Stock | Saddle-Stitch Book Printing Perth

Planning Turnaround Against a Fixed AGM Date

The deadline that matters is not the print deadline. It is the date copies must be in hand, whether that is for a meeting, a mail-out, or a regulatory lodgement. Work backwards from there.

What most schedules underestimate is internal sign-off. An annual report typically passes through several review rounds: finance, legal, the company secretary, and often board or executive approval.

Each round can surface changes, and each change resets part of the proofing cycle.

Where changes come from

Finance
→
Legal
→
Company secretary
→
Board or executive

Every round can surface a change, and every change sends part of the proofing cycle back to the start.

A Realistic Working Sequence

1

Content lock and final sign-off.

The single most important date. Nothing can be printed until this is genuinely final.

2

Pre-press and proofing.

Allow time for a proof, review of that proof, and sign-off on it. Build in a buffer for at least one corrective round.

3

Printing.

Short-run digital is faster; long-run offset needs more time.

4

Finishing.

Perfect binding and hardcover add days; this is not instant.

5

Delivery and distribution.

For a shareholder mail-out, include fulfilment time, not just production time.

The deadline that matters

Copies in hand

The common failure point is treating “sign-off” as a single moment rather than a process. Build a buffer that assumes one round of late amendments, because on a document of this importance, there usually is one.

Why Process Control Matters for a Shareholder Document

An annual report is one of the few documents an organisation produces where a single error becomes a public and permanent problem.

A wrong figure
A missing page
A colour mismatch across a long run

Correcting it after distribution is expensive and reputationally awkward.

This is why documented process control matters. EXBO operates to ISO 9001, which means proofing, approval, and production checks follow a defined and auditable process rather than relying on individual memory.

For a document that goes to thousands of shareholders and cannot be quietly reprinted, that consistency is the point. Everything is produced in-house, so there is no quality drift from a job being passed to a subcontractor mid-run.

Related → Colour Management in Digital Printing

Frequently Asked Questions

At what quantity should I switch from digital to offset printing?

There is no fixed cut-off, as it depends on page count and finishing, but the economics generally start favouring offset in the low thousands.

For board-copy quantities, digital is almost always the right method. Ask for a comparison at your specific quantity.

How much lead time should I allow before the AGM?

Work backwards from the date copies must be in hand, then add a buffer for at least one round of late amendments during sign-off.

A long-run offset job with perfect binding needs more runway than a short digital run, so confirm the production time for your specific specification early.

Can I print a small board run and a large shareholder run separately?

Yes, and it is common. The board often needs copies before the full shareholder distribution.

The key is ensuring both runs print from the identical signed-off file so there is no discrepancy between versions.

Why shouldn’t an annual report be saddle-stitched?

Saddle-stitching suits thin documents and reads as informal.

A shareholder report carries more weight and usually more pages, so perfect binding is the standard choice for presentation and durability.

What if we find an error after sign-off but before printing?

This is exactly what the proofing buffer protects against. A documented approval process means changes are tracked and re-proofed rather than slipped in unchecked.

The important thing is to flag it before the press runs, not after.

Your Next Step

The right production method, finishing, and schedule depend on two things: how many copies you need, and the date they must be delivered.

Decide those early, build in a sign-off buffer, and the rest of the plan falls into place.

To discuss your annual report, prospectus, or member publication, including run size, binding, and a turnaround plan built around your AGM date, visit our publications, reports and books page to get started.

Plan Your Annual Report Print Run

Send us your quantity, page count and the date copies must be in hand, and we will recommend the method, finish and schedule that fits, with a buffer built in for sign-off.

EXBO | Supply Nation Certified | WALGA Registered | ISO 9001 Accredited | Perth, Western Australia

Contact

Get In Touch

  • This field is for validation purposes and should be left unchanged.

This error message is only visible to WordPress admins
Error: No users set.